Operating Wells

  • Wells
  • Geothermal wells
  • Drilling for blasting
  • etc.

   The well is created by drilling a hole 12 cm to 1 meter (5 in to 40 in) in diameter into the earth with a drilling rig that rotates a drill string with a bit attached. After the hole is drilled, sections of steel pipe (casing), slightly smaller in diameter than the borehole, are placed in the hole. Cement may be placed between the outside of the casing and the borehole known as the annulus. The casing provides structural integrity to the newly drilled wellbore, in addition to isolating potentially dangerous high pressure zones from each other and from the surface. With these zones safely isolated and the formation protected by the casing, the well can be drilled deeper (into potentially more-unstable and violent formations) with a smaller bit, and also cased with a smaller size casing. Modern wells often have two to five sets of subsequently smaller hole sizes drilled inside one another, each cemented with casing.

Stock

Current Projects

  • Asarel- Medet JSC
    Asarel- Medet JSC
    Exploration and geotechnical drilling, Panagyurishte, Bulgaria
  • Thrace Resources
    Thrace Resources
    Exploration drilling,  Breznik, Bulgaria
  • Municipality of Madan
    Municipality of Madan
    Hydrogeological project , Madan, Bulgaria
© 2017 GEOPS BDS Ltd. All Rights Reserved.

Search